San Marco Odessa Tap Brass Bush 3868R

There is one bush per Valve so if you think you need one for each valve please order Two. If only replacing one valve, then you only need to order One Bush.

See below for more images / information.

Description

San Marco Odessa Tap Brass Bush 3868R

Brass Bush 3868R (SP3868)

Measurements: 3868R Brass Bush
Outside Diameter: 29mm
Inside Diameter: 19mm
Viewed Height on Tap: 14mm
Overall Height: 20mm

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.

The Brass Bush might be required if fitting new valve and the existing brass bush can not be separated from the old valve that is being replaced. If you can remove the existing valve without removing the brass bush then you might not require this spare part, or if the leak stops just by replacing the Valve, then you can return the Brass bush for a refund.

Here is the San Marco Odessa Tap Valve within the bush