San Marco Deco Tap Valve

£15.40 incl. VAT

Deco Tap Valve for the Hot or Cold side of your Deco Kitchen Tap.

***Before you place your order, please read all the information below

Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

If your Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.

Description

San Marco Deco Tap Valve

Brass Valve with ceramic discs, without thread.

Please note that there are many variations of this Tap in the UK (different manufacturers) and we can only guarantee that the valves listed here will fit the San Marco Deco Tap. Please look carefully at the picture and see if your tap is the same – other versions have differences where spout meets the base. The Deco Tap does not have a locking nut. The Spout is held in with a grub screw.
Here are some close-ups of the Deco Tap to assist you:

Spare Parts for the Franke Vesta Tap (which also looks similar – but the Valve has 28 splines) can be found here.

Here are the measurements of the 3963R Valve:

Overall Height: 50mm
Diameter at thread: 21mm
Nut Height: 6mm
Height of Splines: 8mm
Splines: 20

To Remove the Deco Tap valve (3963R) you will need a common 17 hex key.

There are many versions of this Tap so please check your own Valve against the Valve details here before ordering.

The levers are Horizontal rather than Vertical to operate your Tap on / off, and so this tap should, if plumbed correctly, operate in the Opposite way to a standard twin lever tap. This is important if you are only buying one valve and not a pair. We would recommend that if in doubt as to which valve to order, if you do not understand what we mean by opening clockwise and opening anti-clockwise, order a pair and return the valve that you do not require. When we refer to a Valve as a 'Hot' valves, we mean one that opens Clockwise, When we say 'Cold', we mean one that opens Anti-Clockwise.

Usually, in this style Tap the valves work in the opposite direction to a twin style tap so you would find a Hot valve on the Cold side of your Tap and a Cold Valve on the Hot side.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

Genuine = Proper fit, tested by the Manufacturer
Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50. Can take currently up to 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50. Usually takes c. 2-3 working days. Please make sure to provide mobile number for DPD to text you regarding your delivery.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.