Description

Rudge Bridge Mixer Tap Valve

Order 9.13145 if your Cold Side is dripping (this Valve opens Clockwise).

Order 9.13146 if your Hot Side is dripping (this Valve opens Anti-Clockwise).
See below before ordering. We denote valves as Hot or Cold, based on how they open in a standard Two Lever Monobloc Tap. However, usually in a bridge lever tap the handles operate horizontally i.e. the opposite way , so if your Bridge Lever Tap has levers that are extended when the valves are in the Off position and your Hot Water Feed is on the Left hand side, then you would order one of our ‘cold’ valves that opens Anticlockwise for your Hot Water Side and vice versa for your Cold Water feed.

Valve Measurements
Overall Height: 53mm
Nut Height: 5mm
Diameter at thread: 21mm
No of Splines (teeth at top): 20
Height of Splines: 12mm (with vernier)
Height of Splines: 10mm (without vernier)

Bridge lever valves with CO AND ACO Symbols