Description

Rangemaster TRS1 Tap Valve

This is a very old discontinued tap and the valves used in it back then are no longer available.  We have a version of that old valve, the 1212R with white seal, and have fitted this valve with mixed success.

Please check your own valve, even if 20 splines, to the details here (especially the nut height as if your own nut height is lower than 8mm, it is possible that the current 1212R valve would cause a gap between the handle and the black detail on your tap).  If not sure, then email us your own measurements plus picture of your own valve and whatever markings are on your own valve to sales@tapsandsinksonline.co.uk.

Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

Here are our own valve measurements.

• Valve Measurements
  Overall height: 50mm
  Nut Height: 8mm
  Diameter at thread: 21mm
  Splines: 20
  Height of Splines: 8mm

Rangemaster TRS1 Tap Valve

1212R Valve Blueprint

This customer with valve markings San Marco D05 was left with this gap in picture below.

TRS1 Gap left in some earlier models with 1212R White

Another Customer with markings San Marco B04 on his valve said that due to gap, it didn’t accommodate handle engagement with clip.

Another customer with markings San Marco D07 or B07, said it fitted fine.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.