Taps And Sinks Online

Rangemaster TQM1 Quadrant Tap Valve

£11£33 incl. VAT

Rangemaster TQM1 Quadrant Tap Valve

for the Cold Water side or Hot Water side of your  Tap.

If your Tap is dripping from the Spout then you might need to change your Valves.

Please read the valve information below before ordering.

Description

Rangemaster TQM1 Quadrant Tap Valve

Earlier Installation guides list 2552R Valve. Then in subsequent ones it is referred to as 1427R (SP1427) and even later ones again 3561R (SP3561)- This are all the same valves. We supply the original version of this with the white seal underneath as it is largest seal available for your Tap and the older the Tap is, the more important it is to fit the largest seal possible as it mitigates against any possible Tap modifications made over the years to your Tap that a later Valve might not address in an Earlier Tap Model. This valve will come with a white seal underneath and is known as the 4276R. It is sourced from your Tap manufacturer and is recommended by them to use in older Taps. If your own Tap installation guide specifies a later valve, 3547R (SP3547) then you can order that. Where you do not know the age of your Tap, then you could order the 4276R. We cannot take responsibility for a dripping Tap after you fit a new Valve, if it transpires that you had the the earlier valve 2552R / 1427R and ordered the later one 3547R. We have provided here measurements and images of both valves for reference if you don\'t have your installation guide.

Please also see below regarding the Brass Bush Part as it might be relevant also. Here is our Guide How to remove the Handle on your Kitchen Tap. if you wish to remove your handle and email us some pictures. Here is our Guide 7 easy steps to replace kitchen tap valve.

Measurements 4276R (2552R / 1427R) which we supply with original larger white seal underneath.

  • Overall height: 53mm
  • Nut Height: 8mm
  • Diameter at thread: 21mm
  • Splines: 28
  • Height of Splines: 10mm
1427R Tap Valve

1427R Tap Valve (Cold Valve shown here)

Measurements SP3547
133.0358.165 Hot valve SP3547-H
133.0358.167 Cold valve SP3547-C

  • Overall height: 53mm
  • Nut Height: 6mm
  • Diameter at thread: 21mm
  • Splines: 28
  • Height of Splines: 11mm
SP3547R (shown here Hot Valve)

SP3547R (shown here Hot Valve)

 

Useful Tip

If your valve seems wider in diameter than the replacement valve you order, it is possible that the Brass Bush (Ring) that surrounds the valve inside your Tap has also come away with your Valve.

Should you also require a Brass Bush (one per valve), the same part number SP3886 is used on both Hot and Cold Valve.
133.0312.386 Bush for valve SP3886

Old Valve 1427R inside Brass Bush 3886

Old Valve 1427R inside Brass Bush 3886

Used SP3547 Valve inside Brass Bush SP3886

Old SP3547 Valve inside Brass Bush SP3886

For more information on Changing a Valve and the Brass Bush (Ring) see here.

Rangemaster TQM1 Quadrant Tap FAQ

  • Is this a Genuine Rangemaster Tap part ? Yes it is . If you fit a compatible valve i.e not from your Tap manufacturer the replacement valve can end up slipping on your handle and damage the handle.  You might need a new handle and another new valve.
  • How do I know which Valve to order ? You need to determine where the drip is coming from e.g the cold water feed or the hot water feed. If in doubt, order a pair. There are more detailed tips / advice here.
  • My Valve has a different coloured seal than the one you have sent me : Due to valve modifications over the years we supply the  Tap Valve that covers all these changes.
  • My tap is leaking at the base of the spout, not the top, what do I need?  If your Tap is dripping where the Spout meets the Base then you need to replace your O Ring Kit.
  • How do I access the Valve? You need a 2mm allen key to loosen the grub screw underneath the handle. See below for our DIY Guides.

DIY Guides

Trust Shield Genuine Spare Part This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.
  • Genuine = Proper fit, tested by the Manufacturer
  • Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50. Can take currently up to 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50. Usually takes c. 2-3 working days. Please make sure to provide mobile number for DPD to text you regarding your delivery.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

Rangemaster TQM1 Quadrant Installation Guide

Mythos Valve Change Guide

Reviews

There are no reviews yet.

Be the first to review “Rangemaster TQM1 Quadrant Tap Valve”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…

0

Your Cart