Description

FAQ

• Is this a genuine spare part ? Yes it is
• What size allen key do I need ? You need a 2.5mm allen key to remove the spout which you can buy here. See below for our DIY Guides.
• My own spout doesn’t have the small white ring. It has only one large white ring & two black ones?. Later spouts for your tap had an extra small white ptfe ring added for increased stability. If your own Tap preceded this modification then just discard the ring. Even if you need to replace the spout itself, you can still fit the newer spout (which is slightly longer to accomodate the extra ring) perfectly into your tap.
• I have replaced the O Rings and my spout is still dripping from the base.  Check again the DIY guide to ensure you have fitted corrrectly BUT also check for pinholes.  These are tiny cracks, worn spots, in the spout and water can leak through. If you have pinholes then you will need to replace the entire spout which you can buy here.

Depending on the age of your own Spout, you might only have 1 white ptfe ring.  Usually these white ptfe rings do not need to be replaced unless broken.

Earlier 1260R O Ring Kit (current version has an extra slim white PTFE ring)

Current 3668R (1260R) O Ring Kit

O Ring Kit 1260R consists of 2 black O Rings and 1 white O Ring.

Rangemaster Parma Tap O Ring Kit

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.