Description

Rangemaster Cruciform Tap Spout TCF2 ABCF20713

Spout SP3926 (aka 3926R ) and O Ring Kit SP1425 (aka 1425R)

If you have an older Tap :
The current Spout 3926R (SP3926) is the improved version of the 3218R. It contains the same O Ring Kit but was modified to include an additional PTFE (Teflon) ring for increased stability. So the upgraded Spout is a little longer but fits the exact same as the older shorter Spout. The base in the older Tap models can perfectly accomodate this longer Spout. This improved design change is coming from your Tap manufacturer.

This is a Spout Part and not the complete Tap. We discount all of our Brand New Genuine Spouts in case our checkers / shippers miss a tiny blemish. Our Spouts are Sourced directly from the Manufacturer of your Tap. Below is an example of a tiny mark on a Spout.

This Product listed here is new Replacement Spout Only. It is not a complete new Tap.

FAQ – Rangemaster Cruciform Tap Spout TCF2 ABCF20713:

• Are your spouts brand new or used ? All our parts are brand new. Unused. We apply a small discount in case we miss a tiny mark when inspecting before shipping. We explain this in more detail below.
• Is there an O Ring Kit on this Rangemaster Cruciform Tap Spout TCF2 ABCF20713? All our Spouts come complete with O Ring Kit and Aerator.  If you need the O Ring Kit, and not complete spout, you can buy it here .(See video of what your own spout should look like in case you have a different tap).
• Do you include the grub screw where my spout is held in with a screw ? We do not include grub screws with our spouts.  Different Tap models can use same spout but have different size grub screw.  We sell grub screws separately here.  Retain your own grub screw when removing.  Put a cloth around your tap base to catch it if it falls.
• I can’t locate the grub screw? Unless your spout is held in by a locking nut or is extremely old (where spouts were pushed into the tap) it should be there. Feel around the back of your tap with a finger as its a very small hole. Its usually directly at the back of the base of your tap.
• Do you include silicone grease ? No we don’t because it needs to be applied freshly when installed. You can source this from any Builders Merchant.
• Do I need to call in a plumber to do this ? Most people find this a very straightforward DIY job. Here is our guide to assist you.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.