Description

Rangemaster Aquatrend 1 TRE1 Tap Brass Bush With Recess 3868R

Measurements: 3868R Brass Bush
Outside Diameter: 29mm
Inside Diameter: 19mm
Viewed Height on Tap: 14mm
Overall Height: 20mm

The Brass Bush might be required if fitting new valve and the existing brass bush can not be separated from the old valve that is being replaced. If you can remove the existing valve without removing the brass bush then you might not require this spare part, or if the leak stops just by replacing the Valve, then you can return the Brass bush for a refund.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached. As there are other Brass Bush types used in Tap Spare Parts please check the images provided. The other most common Brass Bush is the 3886R with Lip which can be found here:

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well.

For tips on how to separate a Valve from a Brass Bush, see here.