Description

Rangemaster Aquadisc 5 Pull Out TAD5POCM Tap Valve

Measurements 3819R
Overall Height: 50mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 20
Height of Splines: 6mm

Valve 3819R (shown here the Hot valve. Cold valve is the same without a ‘nick’ in the nut )

Example of Hot 3819R in a Tap

Measurements 1212R
Overall Height: 50mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 20

Example of 1212R in a Tap

For more about changing a valve when the brass bush (ring) comes away with your old valve, please read here

3819R Valve and 3408R Brass Bush attached.

Rangemaster Aquadisc 5 Pull Out TAD5POCM Tap FAQ

• Is this a Genuine Rangemaster Tap part ? Yes it is.
• How do I know which Valve to order? You need to determine where the drip is coming from e.g cold water feed or hot water feed. If in doubt, order a pair. There are more detailed tips / advice here.  This Blog post My Kitchen Tap is dripping should explain the most common causes (and parts required) to fix a dripping Kitchen Tap.
• My tap is leaking at the base of the spout, not the top, what do I need?  If your Tap is dripping where the Spout meets the Base then you need to replace your O Ring Kit.

DIY Guides

• Here is our Guide: How to remove the Handle on your Kitchen Tap
• Here is our Guide: 7 easy steps to replace a valve
• Here is our Guide: How to replace your O Ring Kit
• Here is our General Troubleshooting Guide: UK Kitchen Taps Troubleshooting Guide
• Here is our Guide: How to Remove your Aerator / Antisplash from your Kitchen Tap
• Here is our Guide: What are the Splines on Tap Valve
• Here is our Guide: How to remove a Brass Bush from Valve
• Here is our Guide: How to remove Kitchen Tap Spout

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.