Description

Rangemaster Aquaclassic 2 TAC2CM Valve from 2012 Onwards

• A Hot Valve opens Clockwise
• A Cold Valve opens Anti-Clockwise

On this link here you are buying the 28 splined 4276R valve with white or black seal underneath (stamped San Marco) as the seal is a little larger than later blue / red seals SMR

• Current Valve Version from 2012 onwards 4276R
  Measurements 
  Overall Height: 53mm
  Nut Height: 8mm
  Diameter at thread: 21mm
  Splines: 28
  Height of Splines: 10mm

4276R Pair Hot & Cold Valves

• Earlier Valve Version 2004 to 2011 3984R
  Overall Height: 50mm
  Nut Height: 8mm
  Diameter at thread: 21mm
  Splines: 20
  Height of Splines: 8mm

Rangemaster Aquaclassic 2 TAC 2 (2004 to 2011) Valve 3984R – 20 Splines

Rangemaster Aquaclassic 2 TAC2CM FAQ

• Is this a Genuine Rangemaster Tap part ? Yes it is . If you fit a compatible valve i.e not from your Tap manufacturer the replacement valve can end up slipping on your handle and damage the handle.  You might need a new handle and another new valve.
• How do I know which Valve to order ? You need to determine where the drip is coming from e.g the cold water feed or the hot water feed. If in doubt, order a pair. There are more detailed tips / advice here.
• My Valve has a different coloured seal than the one you have sent me : Due to valve modifications over the years we supply the  Tap Valve that covers all these changes.
• My tap is leaking at the base of the spout, not the top, what do I need?  If your Tap is dripping where the Spout meets the Base then you need to replace your O Ring Kit.
• How do I access the Valve? You need a 2mm allen key to loosen the grub screw underneath the handle. See below for our DIY Guides.

DIY Guides

• Here is our Guide: How to remove the Handle on your Kitchen Tap
• Here is our Guide: 7 easy steps to replace a valve
• Here is our Guide: How to replace your O Ring Kit
• Here is our General Troubleshooting Guide: UK Kitchen Taps Troubleshooting Guide
• Here is our Guide: How to Remove your Aerator / Antisplash from your Kitchen Tap
• Here is our Guide: What are the Splines on Tap Valve
• Here is our Guide: How to remove a Brass Bush from Valve
• Here is our Guide: How to remove Kitchen Tap Spout

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.