Taps And Sinks Online

Howdens Hi-Tech Chrome Tap3407 Valve

£11£33 incl. VAT

Genuine Howdens Hi-Tech Chrome Tap3407 Valve.

If your Tap is dripping from the Spout then you might need to change your Valves.

Please read ALL Valve information below before ordering.

If your Tap is dripping where the Spout meets the Base you might need to replace the O Ring Kit.

Description

Genuine Howdens Hi-Tech Chrome Tap3407 Valve

There are several versions of this tap – some with 20 spline valves, some with 24 splines and  this Tap3407 with 28 splines.

If you are sure that you have the Hi-Tech model e.g. have documentation, then skip down to the advice about which 28 spline valve to order depending on age of your own tap.

The handle is distinctive i.e. the top of each handle looks like a wing detail. Other ‘similar’ handles with 20 splines have a different handle. This is a subtle difference and one that would not be instantly apparent to someone unused to looking at various Tap models.

Close up of Hi Tech Handle Chrome

Close up of Hi Tech Handle Chrome Showing Handle Wing Tip Design

If you are unsure as to the model, then remove your own handle and check which you have before ordering. Or remove handle and send us a picture and we will advise.

This guide 7 easy steps to change your valve will assist you in removing the handle. It’s not hard at all.

If your Tap has 20 splines please take a look at the valves here. If unsure, email us pictures and we can assist you sales@tapsandsinksonline.co.uk

If your tap valve has 20 splines and has two threads (looks like 3984R) then please take a look at this Valve

[/one_half]

If your Tap has 20 splines and has one set of threads (looks like the 3819R) then please take a look at this Valve here.

 

If your Tap has 24 splines, and two threads, please take a look at the valves here. Skip down to the section on 28 spline valves if that is what your own Tap has and if unsure, email us pictures and we can assist you sales@tapsandsinksonline.co.uk

 

If your Tap Valve looks like the 3547R 28 Spline Valve here below (but read all the information please before ordering in case you need to order the two threaded 4276R version of this Valve) :

 
SMR 3547R H

SMR 3547R Valve , Hot shown here.

 
3547R valve inside 3408R Bush

3547R valve inside 3408R Bush

If you have the Hi-Tech Tap which has a 28 spline valve:
Please note that the original 3547R Valve has been discontinued and the replacement 3547R has a flatter seal (from 2015 onwards).
Where your Valve is stamped 2014 or earlier: Please select the Valve 4276R, which is a two threaded Valve and while it might look different than your own one threaded valve, it is the Valve that you need because it has a larger white seal underneath and will work the same as the discontinued valve that is in your Tap.
Where your Valve is stamped 2015 or later: You can select either the 4276R with two threads (which comes with the larger white seal) OR the 3547R one threaded valve which is the same valve that is in your Tap. We are the only stockists of the Genuine coded 4276R valve. Any other website offering a valve suitable, it is only a ‘compatible’ valve and is not the genuine 4276R (which is specifically designed internally for taps such as this).

Please note that rarely, a customer, when fitting the 4276R valve with white seal underneath, reports a slight gap between handle and body of the tap. This is due to the larger white seal. This seal will flatten with use. If you wish to buy the 3547R and your tap continues to drip, we will not replace under 1 year warranty if your Tap is 2014 or older. Please retain your old valve as proof of age of your own Tap. The valve will have a date stamped on it.

  • Measurements 4276R (3561R)
    Overall height: 53mm
    Nut Height: 8mm
    Diameter at thread: 21mm
    Splines: 28
    Height of Splines: 10mm
SMR 4276R Valve Cold

SMR 4276R Valve Cold

  • Measurements 3547R
    Overall height: 53mm
    Nut Height: 6mm
    Diameter at thread: 21mm
    Splines: 28
    Height of Splines: 11mm
SMR 3547R H

SMR 3547R Valve , Hot shown here.

 

 
Sometimes the bush can be stuck to the valve. The 3408R bush is 36mm diameter. One Bush per Valve. The smaller bush 3409R is only 30mm in diameter. You can check your own before ordering if not sure.

3547R valve with 3408R and 3409R

3547R valve with 3408R bush (36mm) and 3409R (30mm diameter)

This is a Genuine Spare Part you are buying here.

Difference between Genuine and Compatible ?

To maintain your warranty and the longevity of your Tap you should replace any parts with only Genuine Spare Parts. "Genuine" means that it is coming from the manufacturer of your own Tap. You might see the word 'Compatible' used on other websites. You might even see same Part Code BUT "Compatible" means that it does NOT come from your own Tap manufacturer. Genuine Tap Parts means that the Parts have been tried and tested in your Tap model. It also guarantees that it will fit your own Tap correctly (provided that you have selected the correct replacement Part). We have had customers who fitted compatible parts in their taps and damaged other connecting parts in the process. It can work out more costly in the end to use Compatible parts.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

 Genuine Howdens Hi-Tech Chrome Tap3407 Spare parts available here
We also advise on what part is needed to save you time & money, even for older models. By fixing your Howdens Tap with Genuine Howdens Hi-Tech Chrome Tap3407 Parts you prolong the life of your quality product.

So many Howdens Models & Discontinued Taps – Don’t worry, We are here to help you
If you don’t see the Howdens model or part that you require on our website please email us as we have Howdens Tap Spares available that are yet online.

All the Parts you need available here

We sell from the smallest Grub screw, to Valves, Cartridges, O Ring Kits, Spouts & Handles. When you purchase Howdens Tap Spares from us you can email us after you have bought it for further advice. Troubleshooting guides and DIY guides to fit all the Howden Tap Spares are linked to the parts online. We also have a Help Section Helpful Tips for the most common queries.

After Sales Service

Our Sales Team is available for excellent after sales service. We have been supplying Kitchen Taps for over 30 years and accordingly can troubleshoot any issue with a Kitchen Tap. The most effective way to maintain your Kitchen Tap is to fix any issue as it arises.

If you ignore a drip it can effect the inner workings of your Tap. It might result in the drip being beyond repair. Often Plumbers advise to replace the Tap. They do this because customers purchase the wrong part or the exact part is hard to source.

If you contact us before buying, we will advise you on the correct part for your Tap. So if you are calling in a Plumber to fix your Tap, all the correct parts will be there for them.

DIY Guides

If you wish to fix the Tap yourself we provide DIY Guides on all our Howden Tap Spares to assist you.

You may also like…

Shipping has now finished for Christmas. New Orders can still be placed but will be dispatched on Thursday 2nd January 2025. Merry Christmas and Happy New Year to All. Dismiss

0

Your Cart