Taps And Sinks Online

Garda Tap3566 Pull Out Brass Bush 3868R With Recess

£11 incl. VAT

Garda Tap3566 Pull Out Brass Bush 3868R With Recess

There is one bush per Valve. There is no difference between the Bush for the Cold Valve or the Bush for the Hot Valve.

Description

Garda Tap3566 Pull Out Brass Bush 3868R With Recess

Measurements

  • Outside Diameter: 29mm
  • Inside Diameter: 19mm
  • Viewed Height on Tap: 14mm
  • Overall Height: 20mm

It’s quite common for the valve you remove from your tap to look different from the one shown in the picture or the one you purchased. This is likely because the brass bush is still attached.

The brass bush may be needed when fitting a new tap valve, especially if the existing bush cannot be separated from the old valve. If you’re able to remove the old valve without taking off the bush, or if the leak stops simply by replacing the valve, you won’t need this part. In such cases, you can return the brass bush for a refund.

 

3561R Valve and Brass Bush 3868R separate

1427R (3561R) Valve and Brass Bush 3868R separate

For tips on how to separate a Valve from a Brass Bush, see here.

Trust Shield Genuine Spare Part This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.
  • Genuine = Proper fit, tested by the Manufacturer
  • Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50. Can take currently up to 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50. Usually takes c. 2-3 working days. Please make sure to provide mobile number for DPD to text you regarding your delivery.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

Howdens Garda Chrome Tap3566 FAQ

  • Is this a Genuine Howdens Tap part ? Yes it is.
  • How do I access the Valve? You need a 2mm allen key to loosen the grub screw underneath the handle. See below for our DIY Guides.
  • How do I know which Valve to order? You need to determine where the drip is coming from e.g cold water feed or hot water feed. If in doubt, order a pair. There are more detailed tips / advice here.  This Blog post My Kitchen Tap is dripping should explain the most common causes (and parts required) to fix a dripping Kitchen Tap.
  • My Valve has a different coloured seal than the one you have sent me?  Due to modifications over the many years that this Tap has been in production, we supply the universal Garda Valve that covers all these changes.  This is based on the manufacturer’s recommendations.
  • My valve looks wider and completely different from the pictures here / the one I ordered ? Is the Bush stuck to your own Valve ? That is the round extra piece of Brass that surrounds the valve. Sometimes they can get stuck together and come out as one piece.  See the images below.  You can order the Bush part separately if needed. It is one Bush per Valve.
  • How do I separate the Brass Bush from the Valve?  Check out this guide here.
  • My tap is leaking at the base of the spout, not the top, what do I need? If your Tap is dripping where the Spout meets the Base then you might need to replace your O Ring Kit.

DIY Guides

 

 

You may also like…

0

Your Cart