Description

Genuine Franke Triflow Trend LD Tap O Ring Kit FR9806

• We always recommend that you should check your own Spout before ordering a new set of O Rings.
• The reason for doing this is because if you have a pinhole in your spout (see example below of a pinhole) then replacing the O Ring Kit will not fix this.
• If you have a pinhole you will need to replace the entire Spout'
• Here is our Guide : How to remove Kitchen Tap Spout so that you can check for pinholes.
• If you think that you have a pinhole, and do not know what Spout you need, then contact us us with the details of your Tap e.g a picture, together with any other information that you know e.g the Brand might be marked on the Tap, so that we can send you a link to the correct Spout that you require.
• Here is the example of a pinhole in a Spout.
  

  Example Pinhole in Spout

Tip when changing the O Ring Kit :

• Usually only the black O Rings need to be replaced on your Spout unless one of the white O rings is broken.
• Some White O Rings have an intentional split in them as they might be used in some spouts that require a grub screw so an intentional split in the ring does not mean it is broken.
• Your new O Ring Kit might have surplus O Rings that may not be required for your particular Spout as some O Ring Kits had an additional smaller ring added in later years for stability.
• You can add Plumbers Grease to aid the movement or washing up liquid. Do not use anything like vaseline that will cause rubber to perish.

This is a Genuine Spare Part you are buying here.

Difference between Genuine and Compatible ?

Each O-Ring Kit contains:

•  1 x PTFE Split O ring for older taps.

•  1 x Stainless Steel Grub Screw (Larger end for older models).

•  1 x PTFE Split O ring for newer taps.

•  1 x Stainless Steel Grub Screw (Smaller end for newer models).

•  1 x Large Rubber O ring (top ring on spout).

•  1 x Small Rubber O ring (bottom ring on spout).

•  1 x Allen Key (for removing and re-fitting the grub screw into the back of the body of the tap).

•  1 x Pack of lubricating grease (for lubricating the O rings prior to re-assembly of the Spout).

Please Note: both older and newer versions of the grub screws and split O rings are included, you will need one type or the other NOT both.

The O Ring Kit listed here is NOT suitable for the Franke Trend (see picture here below) and note the difference in the spout and levers design. It is a completely different looking Tap and takes the O Ring Kit FR9400

Franke Triflow Trend

Genuine Franke Triflow Trend LD Tap Spares available here

We also advise on what part is needed to save you time & money, even for older models. By fixing your Franke Tap with Genuine Franke Triflow Trend LD Tap Spares you prolong the life of your Franke quality product.

All the Parts you need available here

We sell from the smallest Grub screw, to Valves, Cartridges, O Ring Kits, Spouts & Handles. When you purchase Genuine Franke Tap Spares from us you can email us after you have bought it for further advice. Troubleshooting guides and DIY guides to fit all the Franke Tap Spares are linked to the parts online. We also have a Help Section here for the most common queries.

After Sales Service

Our Sales Team is available for excellent after sales service. We have been supplying Kitchen Taps for over 30 years and accordingly can troubleshoot any issue with a Kitchen Tap. The most effective way to maintain your Kitchen Tap is to fix any issue as it arises. If you ignore a drip it can effect the inner workings of your Tap. It might result in the drip being beyond repair. Often Plumbers advise to replace the Tap. They do this because customers purchase the wrong part or the exact part is hard to source. But not if you contact us. If you contact us before buying, we will advise you on the correct part for your Tap. That way, if you are calling in a Plumber to fix your Tap, all the correct parts will be there for the Plumber to fix your Tap.

If you wish to fix the Tap yourself we provide DIY Guides on all our Franke Tap Spares to assist you.

Valve:Tap dripping from the Spout ? Guide to changing Valve here.
Brass Bush: Part surrounding the valve. More info here.
O Rings: Tap dripping where the spout meets the base of the Tap? Guide here.
Aerator: Found at the tip of the spout. Here is our Guide How to Remove your Aerator / Antisplash from your Kitchen Tap.
We supply the full range of Genuine Franke Tap spares across the UK.

Our Sales Team is available for excellent after sales service. We have been supplying Kitchen Taps for over 30 years and accordingly can troubleshoot any issue with a Kitchen Tap. The most effective way to maintain your Kitchen Tap is to fix any issue as it arises. If you ignore a drip it can affect the inner workings of your Tap. It might result in the drip being beyond repair. Often Plumbers advise to replace the Tap. They do this because customers purchase the wrong part or the exact part is hard to source. But not if you contact us. If you contact us before buying, we will advise you on the correct part for your Tap. That way, if you are calling in a Plumber to fix your Tap, all the correct parts will be there for the Plumber to fix your Tap.