Description

Franke Tap Brass Bush SP3868 with recess

Measurements:

• Outside Diameter: 29mm
• Inside Diameter: 19mm
• Viewed Height on Tap: 14mm
• Overall Height: 20mm

The Brass Bush might be required if fitting new valve and the existing brass bush can not be separated from the old valve that is being replaced. If you can remove the existing valve without removing the brass bush then you might not require this spare part, or if the leak stops just by replacing the Valve, then you can return the Brass bush for a refund.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.

There is another bush used in some Franke Taps,  We always recommend that customers remove their own valve before ordering to see if they need a bush , and if so, which bush it is. Here is the next most common bush used in some Franke Taps that looks similar to the Bush SP3868 (with recess) but has a lip instead:

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well.

For tips on how to separate a Valve from a Brass Bush, see here.