Description

Franke Olympus G Tap Spout

Franke Olympus G Close up handle detail – red and blue indicator band on handles

If you have an older Olympus Tap :
The current Spout 3926R (SP3926) is the improved version of the 3218R. It contains the same O Ring Kit but was modified to include an additional PTFE (Teflon) ring for increased stability. This improved design change is coming from your Tap manufacturer. Take a look at our very short video here to show the difference.

FAQ – Franke Olympus G Tap Spout:

• Are your spouts brand new or used ? All our parts are Genuine Parts. They are brand new. Unused. We apply a small discount in case we miss a tiny mark when inspecting before shipping. We explain this in more detail below.
• Is there an O Ring Kit on this Spout? All our Spouts come complete with O Ring Kit and Aerator.  If you need the O Ring Kit, and not complete spout, you can buy it here .(See video below of what your own spout should look like in case you have a different tap).
• Do you include the grub screw where my spout is held in with a screw ? We include the current grub screw 2.5mm. Your own grub screw might be 2mm depending on how old it is.  We sell grub screws separately here.  Retain your own grub screw when removing.  Put a cloth around your tap base to catch it if it falls.
• I can’t locate the grub screw? Unless your spout is held in by a locking nut or is extremely old (where spouts were pushed into the tap) it should be there. Feel around the back of your tap with a finger as its a very small hole. Its usually directly at the back of the base of your tap.
• Do you include silicone grease ? No we don’t because it needs to be applied freshly when installed. You can source this from any Builders Merchant.
• Do I need to call in a plumber to do this ? Most people find this a very straightforward DIY job. Here is our guide to assist you.

You might need to apply some pressure to push down the Spout and make sure that the gap in the white ptfe o ring aligns with the grub screw hole when inserting the new spout.

If you only require the O Ring Kit i.e. your Tap is dripping from the Base, and do not need to replace the complete spout, you can buy the Franke Olympus G O Ring Kit here.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.