Franke Corinthian Filterflow Tap Valve

£17.60 – £35.20 incl. VAT

Franke Corinthian Filterflow Tap Valve

Your handle will have the Letters F, H or C on the handles. If your letters have coloured indicators instead then you have the Corinthian Triflow and takes different parts.

If your Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.

The ‘Triflow’ Corinthian Tap takes a different valve which can be found here.

For more information on whether you have Franke ‘Triflow’ Corinthian Tap or a Franke ‘Filterflow’ Corinthian Tap, see here.

Here is the link to all our Franke Filterflow Corinthian Kitchen Tap Spare Parts.

To avoid ordering the wrong part please check to see if you have correctly identified whether it is the Triflow (earlier) version OR the Filterflow (later version) of your Tap. To assist you you can look at this link HERE which lists all the Triflow and Filterflow Taps by Franke including images.

Description

Franke Corinthian Filterflow Tap Valve

3984R (1212R) Hot or Cold with 20 splines

Some earlier versions of this Installation guide might specifiy 1427R valve, 28 splines, but we believe that this is an error in the guide.

However, if you have Corinthian dating back to very early stages of production i.e from c. 2011 (and you are sure it is the Filterflow version i.e the letters F / H and C are on your levers rather than coloured indicators) you can always easily remove your own handle to check before buying. There is a guide below that gives detailed instructions and diagram.

Here are the instructions again

You will need to unscrew the indicator by unscrewing
it anticlockwise.
You can then unscrew the handle retaining
screw by using a cross head screwdriver.
Once the handle is removed, you can unscrew the valve cover by
unscrewing it anticlockwise.
You will then be able to unscrew the cartridge by using an adjustable spanner.

If you have coloured indicators on your levers then you have the Corinthian Triflow Tap which takes a different valve which can be found here.

1427R measurements
Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm

1427R Valve in Tap with Handle Removed. Wide Part is Bush surrounding Valve that may or may not come out stuck to the valve.

1212R / 3984R measurements:
Height 50mm / Diameter at thread 21mm / Splines 20 / Nut Height 8mm

Showing 20 spline valve with two threads in situ in a Tap

For the Filterflow Tap, even Later installation guides specify 3984R / SP3984 Valve that comes with red / blue seal. This would have same measurements as the 1212R. We supply the earlier original valve 1212r with white seal as this then covers earlier to later production of this Tap. The hot valve opens clockwise. The Cold valve opens anticlockwise.
Brass Valve with ceramic discs.

The Corinthian Triflow also takes a 20 spline valve but do not confuse this with the 20 spline valve version here. The Triflow has coloured indicators on the top of the handles whereas the Filterflow Tap has Letters H / C / F on the handles.

Franke Corinthian Triflow Close Up Handle Detail – Discontinued 2011

1212R Valve Blueprint

Also, sometimes the valve and bush come out stuck together (the bush is the wide brass part). If you cannot remove your own bush to reuse, then you will need to order this as well.

This is a Genuine Spare Part you are buying here.

Difference between Genuine and Compatible ?

To maintain your warranty and the longevity of your Tap you should replace any parts with only Genuine Spare Parts. "Genuine" means that it is coming from the manufacturer of your own Tap. You might see the word 'Compatible' used on other websites. You might even see same Part Code BUT "Compatible" means that it does NOT come from your own Tap manufacturer. Genuine Tap Parts means that the Parts have been tried and tested in your Tap model. It also guarantees that it will fit your own Tap correctly (provided that you have selected the correct replacement Part). We have had customers who fitted compatible parts in their taps and damaged other connecting parts in the process. It can work out more costly in the end to use Compatible parts.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

If you have any questions please don't hesitate to get in touch with us. With 30 years experience in supplying sinks and taps, and the accompanying spare parts to the UK market, we consider ourselves to be experts in this field. Any queries received will be answered as quickly as we possibly can in as clear a manner as possible.

Like us on Facebook and follow us on Twitter for updates on new products and promotions. If you like this item, why not share it with your friends on Facebook.