Clifford Morris Trino Tap Valve

£16.50 – £33 incl. VAT

Genuine Clifford Morris Trino Tap Valve

3547R . You usually replace the Valve (or valves) if your Tap is dripping from the Aerator end of your Spout. Please read below before ordering.

Description

Genuine Clifford Morris Trino Tap Valve

3547R This valve has 28 splines. Very similar models from same manufacturer come with 20 splines. It is so simple to remove your own Kitchen Tap handle to check this very important detail before ordering so here is your guide. Here is our Guide How to remove the Handle on your Kitchen Tap. and if your own Tap valve has 20 splines , see this valve here instead. Or take pictures and email them to us, together with a picture of your Tap and we will gladly assist you in identifying the correct spare part for your Tap.
___________________________________________________________________________

3547RTap Valve Measurements
Overall height: 53mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 11mm

SP3547R (shown here Hot Valve)

If your Trino Tap is dripping from the Spout then you might need to change your Valves. Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve. If your Tap is dripping where the Spout meets the Base you might need to replace the O Ring Kit.

If you are unsure altogether as to the model of your own Tap, again just contact us with the details of your own tap. You can use the Contact Button at the bottom of your screen or send us an email contact us .

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.