Description

Abode Tate Tap Valve

Abode Tap Valve available in hot and cold.

Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm

•  

  Due to modifications in this Tap by the manufacturer over the years, we supply the original white sealed version of this valve (larger seal underneath). We use code 4276R to distinguish from later valve used in the Tap which has a coloured flatter seal. This is a genuine Spare Part. Parts are labelled Hot & Cold. If opened and you cannot tell apart, as both Hot & Cold Valves have white seals underneath: the Hot valve opens Clockwise and has nicks on the side of the nut. The Cold Valve opens Anticlockwise and has no nicks.

   

Bush Part 3868R

• The valve is screwed into a round part called a bush.
• Sometimes these two parts come out stuck together i.e look like one larger part. (see images below).
• If you are unable to check this before you change the part on your Tap, then you could always order the bush as you can return for a refund if not required. It is one bush per valve .
• 

  4276R Valve in tap with Bush 3868R

• Here is an example of the valve stuck inside the brass bush
  

  4276R valve screwed into brass bush 3868R

• Here again are the two separate parts:
  

  4276R valve and brass bush 3868R separate

• Here is the Brass bush product link if you require ithttps://www.tapsandsinksonline.co.uk/product/san-marco-brass-bush-3868r-with-recess/

Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.