Abode Hargrave Bridge AT1145 Tap Valve

£15.40 incl. VAT

Abode Hargrave Bridge AT1145 Tap Valve. If your Tap is dripping from the Spout then you might need to change your Valves. Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

Please read below before ordering any valves as to which valve to order as this tap works differently from your standard two lever tap due to the levers being horizontal when the valves are turned off (closed).

Description

Abode Hargrave Bridge AT1145 Tap Valve

Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm

VERY IMPORTANT: Provided that your Levers are extended outwards (like open arms) when Turned OFF (which is the correct way it should be fitted)

Cold Water Feed (right hand side of your tap as you are looking at it) = Order a HOT CO

Hot Water Feed (left hand side of your tap as you are looking at it) = Order a COLD ACO

(which is the opposite to what you would expect, but horizontal levers open the opposite way to standard two lever taps).

Here is some further detail / explanation:

Provided your Tap has been plumbed correctly i.e. that the levers are extended horizontally when Tap in OFF position (and the Hot feed is on the left and the Cold feed on the right), then please note the following: The norm in Industry when referring to Cold or Hot Valves usually means that a Clockwise Opening Valve is known as a Hot Valve (CO) and an Anti-clockwise (ACO) Valve is known as a Cold Valve. However, in a Bridge Lever Tap where the Levers operate Horizontally rather than Vertically, the opposite applies (provided your Tap is plumbed as described above). This means that you would need our 'Hot CO' Valve for the Cold Feed and a 'COLD ACO' for the Hot Water Feed. If in doubt, remove your own valves first and order the same i.e if your own Valve has a blue seal, order the Cold ACO Valve. If your own Valve has a red seal, order the Hot CO Valve. If your own Valves have white seals, then the COLD ACO valve will have NO nick on the nut, whereas the HOT CO valve will have a nick on each side of the 6 sided nut below the splines. If still in doubt, order a Pair. Please see here an example of a Bridge Lever Tap and note that the Hot Valve is on the Cold Side and the Cold Valve is on the Hot Side.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.