Description

Abode Atlas Monobloc Tap Valve

THIS IS NOT THE ATLAS AQUIFIER FILTER TAP.  Click here if you need valves for that tap

Suitable for Abode Atlas Monobloc Tap AT1053 and AT1054

• • Nut Height: 8mm
  • Splines: 28
  • Overall Height: 53mm
  • Diameter at thread: 21mm

This Tap has been modified over the years, we supply the original white sealed valve version as this covers all modifications. The Hot Valve opens clockwise and the Cold Valve opens anticlockwise.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.

3561R Valve and Brass Bush 3868R separate

Here is the same Valve stuck inside the Brass Bush

3561R Valve surrounded by Brass Bush 3868R

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well.

If your Tap is dripping where the Spout meets the Base you might need to replace your Abode Atlas Chrome AT1053 Tap O Ring Kit 1425R.

Here is the link to all our Abode Atlas Chrome AT1053 Kitchen Tap Spare Parts.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.