Description

9.06401 O Ring Kit

(for some earlier models of Tripure)

Designed to replace the existing O rings on the base of the spout on any of the Perrin & Rowe models or any of the Franke Triflow models (NOT Filterflow). You will need to do this if there is water coming out of the joint between the spout and the body of the tap or alternatively if the spout has become very loose. See here for further details on the 9.06401 O Ring Kit and its components.

Also see FR9806

9.06401 O Ring Kit

Each 9.06401 O-Ring Kit contains:

• 1 x PTFE Split O ring for older taps.
• 1 x Stainless Steel Grub Screw (Larger end for older models).
• 1 x PTFE Split O ring for newer taps.
• 1 x Stainless Steel Grub Screw (Smaller end for newer models).
• 1 x Large Rubber O ring (top ring on spout).
• 1 x Small Rubber O ring (bottom ring on spout).
• 1 x Allen Key (for removing and re-fitting the grub screw into the back of the body of the tap).
• 1 x Pack of lubricating grease (for lubricating the O rings prior to re-assembly of the Spout).

Please Note: both older and newer versions of the grub screws and split O rings are included, you will need one type or the other NOT both.