How to.... Archives

Archive for How to….

Different Valves used in Kitchen Taps

Posted by Alice on 29/02/2020

Here below are examples of actual Valves in Taps to assist with Identification (or check) and some additional information to assist you in making the correct purchase. Remember, you can always return any unused parts or email us sales@tapsandsinksonline.co.uk for further advice / help. We are used to reviewing taps and parts and can quickly […]

Continue Reading →

Posted in: Abode Kitchen Taps Spare Parts Guide, Carron Taps Spares Guides, Franke Tap Spare Parts Guides, Helpful Tips, How to identify which Valve you need, How to...., Howdens Lamona Kitchen Taps Spare Parts Guides, Perrin and Rowe Tap Spare Parts Guides, Plumbing Guides, Rangemaster Leisure Spare Parts Guides

Leave a Comment (0) →

Valve & Vernier Insert Changing Procedure for the Perrin & Rowe Oberon Lever Tap

Posted by Alice on 19/02/2020

Valve & Vernier Insert Changing Procedure for the Perrin & Rowe Oberon Mixer Tap It should be an easy matter to change the Valve & Vernier Insert if you follow these simple instructions and refer to the diagram below. 1) Turn off water supplies to mixer tap. Place plug in waste to prevent loss of […]

Continue Reading →

Posted in: Helpful Tips, How to...., Perrin and Rowe Tap Spare Parts Guides

Leave a Comment (0) →

Valve & Vernier Insert Changing Procedure for Atriflo Crosshead Taps

Posted by Alice on 27/10/2019

From Perrin and Rowe (Avillion / Triflow / Atriflo) It should be an easy matter to change the Valve & Vernier Insert if you follow these simple instructions from Perrin and Rowe (Avillion) and refer to the diagrams below. 1) Turn off water supplies to tap. Place plug in waste to prevent loss of small […]

Continue Reading →

Posted in: Helpful Tips, How to...., Perrin and Rowe Tap Spare Parts Guides

Leave a Comment (0) →

SP3308 and SP3794 Valves

Posted by Alice on 07/08/2019

When your Tap was first produced the manufacturer used a valve which had 2 flat sides on the nut (SP3308 (aka 3308R). This Valve has been discontinued and the manufacturer now uses a very similar valve with a six sided nut, SP3794 (aka 3794R). The Hot and Cold Valve are not interchangeable: The Hot opens […]

Continue Reading →

Posted in: Helpful Tips, How to identify which Valve you need

Leave a Comment (0) →

O Ring Kit Seal kit Changing Procedure for the Perrin and Rowe Mixer Tap.

Posted by Alice on 05/06/2019

O Ring Kit Seal kit Changing Procedure for the Perrin and Rowe Mixer Tap. It should be an easy matter to change the O Ring Kit (seal kit) in your tap if you follow these simple instructions. To remove the Spout: 1) Turn off the water supplies to the mixer tap. Place plug in to […]

Continue Reading →

Posted in: Helpful Tips, How to...., Perrin and Rowe Tap Spare Parts Guides, Plumbing Guides