Archive for Franke Tap Spare Parts Guides
If your Franke Doric Tap is leaking from the Spout then you need to replace the valves. Key differences between the two taps : the Doric Triflow (on the left) is sitting on a plinth, whereas the Doric FilterFlow has no plinth. The Filterflow Aerator has a narrow tube protruding from the middle. The valve […]
Continue Reading →If your Corinthian Tap is dripping from the Spout then you need to replace the valves. Your Corinthian Triflow or Filterflow tap takes 3 valves (1 hot and 2 cold). If your Corinthian Tap is leaking from the Hot side then usually replacing the hot valve will solve this. It is a little bit trickier […]
Continue Reading →If your Franke Tap leaking at base then you probably need to replace the O Rings. Different Franke Taps take different O Rings. If you go to our Franke Spare Parts Section here and select your Franke Tap (based on the pictures) and click on the link this will bring you to the O Ring […]
Continue Reading →The Franke Triflow version of the same / similar Tap takes a different Valve and O Ring Kit than the Franke Filter Flow version even though the Taps might look the same. If you are replacing the Valve or O Ring Kit on your Franke Triflow / Filter Flow Kitchen Tap then you need to […]
Continue Reading →If your Franke Olympus Tap is dripping Check valves if your Tap is dripping from the Tip of the Spout (Aerator end) or Handle. You will need a 2mm allen key to remove the handle. Examine the Spout base for worn O Rings or pinholes in your Spout if the tap is dripping there. You […]
Continue Reading →